Cortec VpCI-395 Kit - White/Gray Color

This VpCI-395 Kit Contains 4 Gallons of Part A and 1 Gallon of Part B

VpCI-395 is waterborne epoxy primer that provides excellent adhesion, salt spray, immersion and long term corrosion protection to steel. VpCI-395 differs from other epoxy primers by minimizing long-term embrittlement and has a fast drying time (20-30 minutes dry to touch) as well as excellent corrosion resistance. Its water-based formulation makes it easier to comply with environmental regulations governing solvents and VOC limits. Clean up is easy by using soap and water.

Features:

• Provides long-term corrosion resistance in a corrosive atmosphere
• Water-reducible
• VOC compliant
• Fast drying
• Excellent adhesion
• Excellent immersion resistance
• Long pot life of 6-8 hours
• Works in HCI, H2S, SO2 and CO2 vapor environments
• UL Classified in accordance with ANSI/NSF Standard 61 for potable water (applies only to RAL 7046)

Mixing
Mix 4 parts of Part A to 1 part of Part B. Mix until a uniform coating is obtained. After mixing, do not apply VpCI-395 for at least 30 minutes. The pot life of VpCI-395 is approximately 6-8 hours at 75 degrees (25 degrees C). This value may change depending upon the temperature and size of the batch

Application
VpCI-395 may be applied by spray or brush. A dry film thickness of 1.5-3 dry mils (37.5 - 75 microns) is recommended. The coating dries in about 20-30 minutes; however, it takes approximately one week before the coating is fully cured. Top coats can be applied between 30 minutes and 8 hours after the primer is applied, depending upon the type of top coat and drying conditions.

Packaging and Storage
VpCI-395 part A is available in 5 gallon pail filled with 4 gallons. VpCO-395 part B is available in a 1 gallon can. You will receive both part A and part B as a kit when you order this item.

Quantity Discounts Available for Large Orders. Please call for more information.